|
Cable Assembly Instruction |
Clamp
|
 |
STEP 1. |
All parts of the connector are shown. |
| STEP2. |
Strip the cable inner conductor, dielectric, braid, and
jacket as per "Recommended Cable Stripping DIM'S" in the On-Line Catalogue. |
STEP 3. |
Thread the Gasket onto the cable until against
cable jacket. |
| STEP 4. |
Thread the Clamp Nut onto the cable until the A
dimension 1-1.5 mm, then push the Top Hat onto the outer conductor of cable inside
as shown. |
| STEP 5. |
Thread the Main Body onto the Clamp Nut
and tighten the connection with wrenches, hold the Clamp Nut and turn only the
Main Body. |