Cable Assembly Instruction
Crimp/Crimp
	STEP 1.	All parts of the connector are shown. A crimp tool is necessary to complete the termination.
	STEP2.	Strip the inner conductor, dielectric, and jacket as per "Recommended Cable Stripping DIM'S" in the On-Line Catalogue.
	STEP 3.	Insert inner conductor into the Contact PIN and crimp it with the crimp tool as shown. Then Slide the Ferule onto cable.
	STEP 4.	Insert the Main Body into braid and dielectric.
	STEP 5.	Slide the Ferrule over braid and crimp it with the crimp tool as shown.